Support Systems of Gas Turbine Power Plant

Our Ration for the course : 4.7 Start Based on 56 users

False start drains / Gas fuel handling system

Fuel strainers and filters / On-base liquid fuel system / Control and shut-off valves

Liquid fuel storage and transfer system / Fuel pumping and heating

Atomizing air and purge air system

Air bleed to prevent stall / Typical fuels used in gas turbines

Air cooling systems, bearing seals

Hydraulic oil system / Air inlet system, filtration, guide vanes / Compressed air extraction system

Oil temperature and pressure control / Trip (control) oil system

Oil pumps: main, auxiliary, emergency DC / Oil coolers, heater, strainers and filters

Bearing layout, journal and thrust / Typical lubricating oil system

Name of Course	Scheduled Dates	Vanue	Registration Link
Support Systems of Gas Turbine Power Plant	To be determined	Abu Dhabi, UAE	Registration Now

Introduction

The gas turbine is the most versatile item of turbomachinery today. It can be used in several different modes in critical industries such as power generation, oil and gas, process plants, aviation, as well domestic and smaller related industries. A gas turbine essentially brings together air that it compresses in its compressor module, and fuel, that are then ignited. Resulting gases are expanded through a turbine. That turbine’s shaft continues to rotate and drive the compressor which is on the same shaft, and operation continues. A separate starter unit is used to provide the first rotor motion, until the turbine’s rotation is up to design speed and can keep the entire unit running.

Course Objectives

Duration & Learning Level

Learning Level:

Intermediate

Duration:

4 days

Support Systems of Gas Turbine Power Plant

The objective of this course is to present and discuss features of the various support systems and auxiliaries that are necessary for operation of the gas turbine. Both ON-BASE and OFF-BASE equipment is studied. Note that, the design of the support systems varies according to the size and purpose of the gas turbine unit  Bearing layout, journal and thrust  Typical lubricating oil system  Oil pumps: main, auxiliary, emergency DC  Oil coolers, heater, strainers and filters  Oil temperature and pressure control  Trip (control) oil system  Hydraulic oil system  Air inlet system, filtration, guide vanes  Compressed air extraction system  Air cooling systems, bearing seals  Atomizing air and purge air system  Air bleed to prevent stall  Typical fuels used in gas turbines  Liquid fuel storage and transfer system  Fuel pumping and heating  Fuel strainers and filters  On-base liquid fuel system  Control and shut-off valves  False start drains  Gas fuel handling system  On-base gas fuel system  Dual-fuel firing system  Significance of NOX, SOX, CO, and particulates  NOX control systems, Low-NOX burners  Cooling systems  Generator cooling, air and hydrogen cooling systems  Gas Turbine compartment cooling by air  CO2 fire protection system

Exam & Certificate

Completion Certificate will be awarded after the training

Target Group

Engineers, Operation & Maintenance Staff of Power Plant

1. How do I enroll/register for the training course?

To enroll or register to any training course, you can use the registration page from training page or fill the request a call back form from each course pages. The following page will provide you a list of course and training that we are providing based on the category and from each course item you can see the course details.
URL: https://nbizinfosol.twtests.co.in/training.aspx
Another method is to fill a Request a call back form provided in each Training/Course pages.